Winch On Servo (W.O.S.) Fits 18-24 scale

Keep it simple! No electronics needed.

The Winch On Servo (W.O.S.) is here! This little coil spring winch packs just over 1lb of pulling force with 14 inches of winch line. Perfect for keeping the front end down to give traction to all 4 wheels when hooked up to the winch. No need for extra channels or more electronics to run. Saves time compared to an electronic winch with its slower deployment! 

This mounts directly on top of your servo with a 28mm spacing hole to hole, which covers most micro servos, like the Torrent, Reefs 99, Injora 11kg servos. This gives a solid platform along with 13 grams of un-sprung weight with the CNC'd Brass mount attached to the servo. This is ideal for Class 3 rigs or no body rigs with the servo and front axle uncovered. You can fit this under some bodies. Modification to the body may be needed for some. 

If a Land anchor is hooked back to the body or chassis, it will help keep the front end from unloading. You can also just mount the land anchor on or near the servo. I offer the land anchors in A36 steel which is ferrous and will hook up to a magnet for easy storage.

Combine it with 3Flow9 RC land anchors and you'll be ready to hook up to those nasty climbs! Add a D-Ring and Winch Hook for quick disconnect of the land anchor from the winch if you want the land anchor stored separately. 

You can also add 8 inches of bungee line to the end for extra reach.

Mounting holes are m1.4. If using m2, you can simply drill the holes to 2mm. If you want me to up size it for you, just give me an email. 

Includes the Winch and Brass mount and 14 inches of winch line.

Land anchors, D Rings, and servo are sold separately. 

Winch On Chassis (W.O.C.) mount will be available soon!