Wide Mouth Brushed Motor Plate for Losi Micro-B

Unleash that brushed power and simplicity with bigger pinions and stock electronics(or upgraded!) Easily done with the Wide Mouth Flow Motor plate for the Losi Micro-B.

This is made from Grade 5 Titanium. 1mm thick.  Strong and light! Open end design so you don't have to pull and pry off your pinion just to change motors. Fits 030 and 050 brushed motors(MOFO Buzzsaw motors) with a 10mm hole spacing such as the stock motor has.  Go from 11t to 16t pinion but note that fitting anything bigger than a 13t pinion on a 1.5mm shaft will be difficult to get the motor bolts in. So anything bigger than 13t pinion, you'll have to mount the motor to the plate first, then press the bigger pinion on. A 16t is max pinion size to be able to access the motor bolts still with a 1.5 shaft and press on pinion. 

Great for stock racing to be able to swap stock motors with ease. Fine tune your stock mesh as well!

Stock dust cover will fit with very light trimming. 

Weighs 1.6 grams