Hind Flow Skid - Fits LGRP Super 8 axles

The Phatty or Skinny Hind Skid can be placed on front or rear Axles or both!  Made from either 3D print/Delrin/Brass, these Hind skids replace your diff cover and provide 39° of sliding angle compared to the 90° stock diff cover.

The Phatty and Skinny Brass Hinds was made in mind to use on the front axle for great weight bias. Phatty Brass weighs 52.5 grams!  and the Skinny Brass weighs 22 grams! So this means you could remove your brass wheel/rings and get lighter rotational weight in your wheels(Better acceleration and deceleration) while still having good un-sprung weight up front. Then have the Phatty Hind in the rear for maximum deflection. But its your rig, run both brass. both Skinnies, both Phatty's or both Delrin or mix it up for better weight bias!

Comes with bearing preinstalled and hardware.

If not using a link riser, some modification will be necessary for the upper links to not hit but not always the case. 

Weight - Phatty 3D - 7 grams

               Phattty CNC Delrin - 9 grams

               Skinny 3D - 3 grams

               Skinny CNC Delrin - 3.7grams

              Skinny Brass - 22 grams

              Phatty Brass - 52.5 grams

Don't get your rear end hung up on your lines, keep the Flow!