Flow Rear Link Riser - Fits Hobby Plus CR-18/FX118

This rear link Riser bolts into place on the rear axle giving you a few options for Anti-sqaut adjustment on your upper suspension links. M2 Hardware included. Fits Hobby Plus CR-18, Fits FX118 axles The Low Pro option is best for stock truck configuration with No cutting or modifying required.  But The High pro you will need to relocate the esc tray or trim it back. This is a little bigger but more anti-squat positions.

**7075 Aluminum option coming soon**

Anti Squat explained:

A high Anti-Dive value will help keep your front end down on steep climbs transferring power to the tires and not the chassis but also lifts the rear end slightly under hard acceleration which forces the front end down.

 A low anti-dive value under 100% will cause the front suspension to compress under braking called nose-dive. Under acceleration a low anti dive geometry will cause the front end to lift and the suspension to unload which also shifts weight to the rear of the truck. This good for faster trucks on dirt, helps rock bouncers keep the suspension extended during a climb and for mud drag racing. Your chassis and link setup will determine your final values. Good measure to find your values on your tuck and even better to just test each configuration out

 Anti-Dive above 100% is good for hardcore technical rock crawling

 Anti-Dive below 100 % is good short course racing, rock bouncers, mud trucks

 lifetime warranty